For silica sand, state the application, target grading and chemical composition together. Acceptance criteria can differ substantially for glass, foundry and filtration uses.
Sand and aggregate inquiries should be assessed by application, grading, source and delivery method. A product name alone may not be enough to compare quotations.
Scope and technical review
Set requested test parameters and acceptance limits for the intended application. State the grading ranges, fines limits, moisture condition and required test documents. Confirm the applicable standard and project specification with the responsible engineer.
Pre-quotation checklist
- Source and loading point, sample or test report, net quantity, unit, destination and acceptance criteria.
- State quantity, unit, delivery point, target date and acceptance method.
- Confirm the current specification and required documents for the destination market.
Delivery and acceptance
At quotation stage, compare truck or vessel type, loading capacity, bulk or bagged delivery, port charges and unloading conditions in writing. Record the agreed lot, quantity and receiving contact so the delivered scope can be checked against the order.
Frequently asked question
What information is needed for an aggregate quotation?
Grading, intended use, quantity, source or destination, delivery method and required quality documents are core inputs for an initial review.
Request a project-specific quotation
Share the technical scope, quantity and destination with AGREBET. Product availability, specifications, documents and commercial terms are confirmed for each inquiry.
Related product scope: Sand and Aggregate Sourcing.
Technical information is general guidance. Confirm current manufacturer documents, applicable requirements and project approvals before purchase or application.
